Autoplugin RCP-V5 Manual do utilizador - Página 10

Procurar online ou descarregar pdf Manual do utilizador para Módulos GSM/GPRS Autoplugin RCP-V5. Autoplugin RCP-V5 12 páginas.

Imprimir página

Connection

Permanent connection to the car's wiring is required. See installation manual for

detailed connection schemes for various remotes.

RCP needs that timers and direct start / stop function for the heater control are

present in the CIP. Therefore it may be necessary to load the special software to

the CIP at first, by the means of Volvo dealer's equipment.

Troubleshooting

If a run-time error occurs during the heater operation, RCP informs about error

code with embedded LED flashing. The number of flashes in series corresponds to

the error code. See table 4 for errors description and possible solutions.

Error

Code

Description

No answer

from the

heater

followed the

start

command

Battery low

Time limits

exceeded

Possible Reasons of

Error Appearance

Outer temperature

displayed by the CIP is

higher than +14 Celsius

degrees

Fuel level in the fuel

tank is close to empty

("Fuel Low" warning

indicator is illuminated

in the CIP)

The heater was blocked

after 3 unsuccessful

starts

The module has

determined that the

battery voltage is below

the specified by settings

items 3.1 or 3.2

Time limit for

autonomous operation of

the heater is achieved

(with applied setting 1.1)

Solutions

The heater operates only at

temperatures below +15°C. It

is heater manufacturer

restriction

Refuel the car

Try to start the heater in the

CIP menu. If it doesn't start

up, make diagnostics of the

heater.

Charge car's battery with

special charger (or start engine

to charge) or cancel 3.1/3.2

module's settings

Run the engine or cancel

applied setting

Table 4