Galileo Quark SoC X1000 Manual de iniciação - Página 8

Procurar online ou descarregar pdf Manual de iniciação para Hardware informático Galileo Quark SoC X1000. Galileo Quark SoC X1000 20 páginas.

the name.

Example Mac directory structure. We've renamed the application to ArduinoGalileo to differentiate it

Double-click your newly downloaded Arduino application to run the IDE.

Linux Install

Linux users need to use the

should do.

linux32.tar.gz

It's also necessary to disable the modem manager on most Linux distributions, to enable

uploading to the board. This will vary by distro, but something like

will work.

Once installed, run the arduino file in the extracted directory. From a terminal, you can enter

to run it.

Driver Installation

Once you've downloaded and installed the software, the next step is to connect the board and install

drivers. This process differs on each operation system, follow the directions below that pertain to

your OS:

Windows

Mac OS X

Linux

1. Connect a 5V power supply to the Galileo. (The USB port alone cannot supply enough power

to run the Galileo.)

from our other Arduino install.

tool to extract the tar.gz file. A command like

tar

Page 8 of 20

tar -zxvf arduino-1.5.3-

sudo apt-get remove modemmanager

./arduino