GalileoSky v 7.0 Manual do utilizador - Página 10
Procurar online ou descarregar pdf Manual do utilizador para GPS GalileoSky v 7.0. GalileoSky v 7.0 12 páginas. Installation and connection of galileosky tracking device
Imprimir páginaInstallation and Connection of Galileosky Tracking Device
version 7 dated from 19.06.2018
connect the black wire to the negative plug of the battery via 1А fuse;
connect the red wire to the positive plug of the battery via 1А fuse.
Dielectric spacer
Fuse
3.
Connection from the vehicle network (Pic. 14). This way of connection is used when the
connection of the tracking device from the battery does not provide the required electrical
safety level. The order of connection is the following:
carry out 2 (two) direct wires of red and black color from the tracking device to the nearest
places of location of the negative and positive contacts of the vehicle network;
after disconnection of the ignition key use a multimeter to make sure that there is supply
voltage in the positive contact;
use a multimeter to make sure that there is electrical communication between the vehicle
body and the negative contact of the vehicle network;
connect the black wire to the negative contact via 1А fuse;
connect the red wire to the positive contact via 1А fuse.
Fuse
Battery disconnect switch
Fuse
-
vehicle
+
network
Pic. 13
Connection from the
battery with the battery
disconnect switch
Pic. 14
Connection from the
vehicle network
10