Dynatech PQ-4000 UD Manual de instruções de utilização e manutenção - Página 19

Procurar online ou descarregar pdf Manual de instruções de utilização e manutenção para Equipamento de segurança Dynatech PQ-4000 UD. Dynatech PQ-4000 UD 19 páginas. Progressive safety gear
Também para Dynatech PQ-4000 UD: Manual de instruções de utilização (11 páginas)

Imprimir página
Dynatech PQ-4000 UD Manual de instruções de utilização e manutenção
Maintenance company
Model / Serial No.
Reference of installation
1
PUTTING INTO SERVICE
1.1 Check the proper assembly of the car safety gear
1.1.1 Visual check of general conditions
1.1.2 Check of the guide rail state
1.1.3 Length of marks on the guide rail
1.2 Check the proper assembly of the counterweight safety gear
1.2.1 Visual check of general conditions
1.2.2 Check of the guide rail state
1.2.3 Length of marks on the guide rail
(1)
Check for wear or damage in the safety gear
2
MAINTENANCE
2.1
Visual inspection and visual check
2.2
Clean, absence of strange elements
2.3
Controlled engagement of car
2.4
Visual inspections of wears
MAINTENANCE CHECKLIST
3
3.1
Check that there is no interference between shoe and guide rail.
3.2
Check that there is no interference between rollers and guide rail
Check the fixings and clearance between safety gear and frame
3.3
Clean grease, chips or dust inside safety gear.
3.4
3.5
Check rollers movement
3.6
Visual check governor linkage
Visual check for damage and defects
3.7
Check driving bar state
3.8
3.9
Check car inclination
3.10
Check safety switch
Clean guide rail
3.11
Remove marks and chips from the guide rail
3.12
3.13
Apply lubricant on the guide rail
3.14
Length of marks on the guide rail
Begining of marks on the guide rail
3.15
Visual check for wear
3.16
1. GENERAL PROVISIONS APPLICABLE TO DYNATECH SAFETY GEAR
FREQUENCY
First time before
putting into service
(1)
First time before
putting into service
(1)
FREQUENCY
6 month
6 month
12 months
12 months
DATE
15/10/2020
REV
0
DYNATECH
OK
NO OK
INSTRUCTIONS
4.2
4.1
4.2
4.1
DYNATECH
OK
NO OK
INSTRUCTIONS
4.2
4.2
4.2
4.1
DYNATECH
OK
NO OK
INSTRUCTIONS
4.3.1
4.3.1
4.3.1
4.3.1
4.3.1
4.3.1
4.3.1
4.3.1
4.3.1
4.3.1
4.3.1
4.3.1
4.3.1
4.1
4.1
Date:
OBSERVATIONS
6.3.4 of EN 81:20
6.3.5 of EN 81:20
OBSERVATIONS
6.3.4 of EN 81:20
OBSERVATIONS
adjust only if required
adjust only if required
adjust only if required
only if required
have a register list