DYNATEK ARC-2 Manual - Página 7
Procurar online ou descarregar pdf Manual para Acessórios para motociclos DYNATEK ARC-2. DYNATEK ARC-2 10 páginas.
Imprimir página
Standard Installation Diagrams (CONTINUED):
Note: Perform all cuts and splices close to the coil. There should be NOTHING ELSE connected to the
wires that go between the ARC-2 and coil (the white, blue, and black wires). Failure to follow this will likely
damage anything else connected, and possibly damage the ARC-2 and coil as well.
Typical 4 cylinder Distributorless Ignition, 4-coil on plug (COP) setup:
ECU or Power Transistor
BEFORE
AFTER
ECU or Power Transistor
ARC-2
Tech Support: 1800-928-3962
SWITCHED +12V
Coil 1
Signal
Coil 2
Signal
Coil 3
Signal
Coil 4
Signal
SPLICE
SWITCHED +12V
SPLICE
Coil 1
CUT
Signal
SPLICE
Coil 2
CUT
Signal
Coil 3
CUT
Signal
Coil 4
CUT
Signal
RED 12GA
30A FUSE
BLACK 12GA
-
BATTERY
Coil #1
Coil #2
Coil #3
Coil #4
CUT
Coil #1
Connect in Series
Coil #4
Coil #2
Connect in Series
Coil #3
WHITE
+
Installation Guide- 7
2801211