HighGear AltiTech 2 Manual do utilizador - Página 13
Procurar online ou descarregar pdf Manual do utilizador para Ver HighGear AltiTech 2. HighGear AltiTech 2 20 páginas. Time, compass, barometer, altimeter, chronograph, and alarm
Também para HighGear AltiTech 2: Manual de referência rápida (2 páginas)
Imprimir página
TABLE OF CONTENTS
ALTIMETER
Because the ALTIMETER system in the Summit/Altitech 2 relies on barometric pressure for its
measurements, it is critical that you regularly calibrate the unit to a known altitude. For maximum
accuracy, daily calibration is a must. If you are using the unit during times of changeable weather, the
unit may need to be calibrated more often. Generally, the small pressure changes experienced during a
day of use will have only a minor effect on the accuracy of the unit, however, the arrival or departure of
a weather front can change the current weather display by several hundred feet or more.
The ALTIMETER has one display screen. When you enter the altimeter the TOP LINE will scroll,
showing you your MAXIMUM AND ACCUMULATED altitude since the last time they were reset.
After the scroll has completed, the TOP LINE shows you a graphic indication of altitude changes over
time. The CENTER LINE of the display shows your current elevation and the BOTTOM LINE shows
the TIME OF DAY.
SET ALTIMETER
1. Start in ALTIMETER mode.
2.
PRESS & HOLD
the
S4
key to enter the setting sequence.
3. The CURRENT ALTITUDE will appear flashing in the center line of
the display.
4. Adjust the CURRENT ALTITUDE up and down using the
S2
keys.
23
ALTIWARE SERIES
S1
and
ALTIMETER
TABLE OF CONTENTS
SET ALTIMETER
(continued)
5. Set the CURRENT ALTITUDE and advance to the ALTITUDE
MEMORY displays using the
S3
key.
6. There are two altitude memory displays showing the Maximum
Altitude and Accumulated Ascent since the last time the memory
was cleared. Clear each memory using the
advance from the MAXIMUM to the ACCUMULATED memories
using the
S3
key.
7. Exit the ALTIMETER CALIBRATION sequence using a
PRESS
of the
S4
key.
S1
or
S2
key and
QUICK
summit/altitech 2
24