HighGear FitWare Manual do utilizador - Página 7

Procurar online ou descarregar pdf Manual do utilizador para Pedómetro HighGear FitWare. HighGear FitWare 11 páginas. Fitware series

Imprimir página

FitWareIM

3/24/05

STEP COUNTER MODE

(ALL MODELS)

WEARING YOUR FITWARE PEDOMETER

The FitWear pedometer may be attached to the

waist band of your pants or belt in any location

which is convenient and easy for you to read. Make

sure the display of the unit is located at the top

when you are wearing it.

USING THE STEP COUNTER

1. Use the

key to advance to the STEP mode.

PRESSING & HOLDING

in any STEP COUNTER screen will clear the

following exercise information: NUMBER OF

STEPS TAKEN, CALORIES, DISTANCE or TIMER.

3. When starting to exercise, for greatest accuracy,

attach the unit to your belt or waistband and then

clear the step counter to zero by

HOLDING

the

key for 2-seconds. Clearing the

unit to zero prior to attaching the unit to your belt or

waistband may result in extra "steps" being counted.

FITWARE SERIES

1:53 PM

Page 12

the

key for 2-seconds

PRESSING &

STEP COUNTER MODE

(ALL MODELS)

The FitWare units allow you to program a target number

of steps for any workout. Once you program a target and

start walking the FitWare unit will automatically count

down from your target. When you reach zero an alarm

will sound indicating you have reached the target.

1. Enter STEP mode and press the

TARGET is briefly displayed on the screen.

PRESS & HOLD

the

key to clear any existing

targets and start the programming sequence.

3. 5 ZEROS will appear on the display with the far left

digit flashing.

4. ADJUST the flashing digit UP or DOWN using the

and

keys.

5. Advance to the next digit using the

wish to program a lower number simply press the

key while a zero is flashing and move to the next

lower digit.

6. When you have programmed your step target, press

the

key one final time to return to the STEP

display.

FitWare

key 4 times until

key. If you

Pulse