DCS EH-36SS Manual de utilização e instalação - Página 7

Procurar online ou descarregar pdf Manual de utilização e instalação para Campânula de ventilação DCS EH-36SS. DCS EH-36SS 18 páginas. The professional euro vent hood
Também para DCS EH-36SS: Manual de utilização e cuidados (11 páginas), Manual de utilização e cuidados (7 páginas), Manual de instalação (14 páginas), Manual de instalação (16 páginas)

Installation Inst ructions

TOOLS NEEDED FOR INSTALLATION

• Saber Saw or Jig Saw

• Drill

• 1 1/4 Wood Drill Bit

• Pliers

• Phillips Screwdriver

• Flat Blade Screwdriver

• Wire Stripper or Utility Knife

• Metal Snips

• Measuring Tape or Ruler

• Level

• Pencil

• Caulking Gun

• Duct Tape

This euro hood can be installed with (Fig. 03) or without (Fig. 04) an optional telescopic chimney kit

(model #ECD-2SS). In a ducted application, this euro hood can be vented through the wall or ceiling.

To vent through a wall, a 90

vents out of grates on the sides of the ductless chimney kit (model #ECND-2SS). This ductless instal-

lation also requires a charcoal filter kit (model #ECF). When installing ductless without the optional

chimney kit, some ductwork must be installed to divert the air out of the cabinet. This installation

requires charcoal filter kit (model #ECF). See page 11 for more details on all ductless installations.

WARNING: Before making any cuts or holes for installation. Determine which venting method will be

used and carefully calculate all measurements.

Standard installation for the euro hood requires the canopy to be mounted 30" above the countertop

(Fig. 05a). The optional telescopic chimney kit can be adjusted for ceilings between eight 8' 2" and 9' 8"

(Fig 05b).

PARTS SUPPLIED FOR INSTALLATION

• 1 Hardware Package

• 1 Literature Package

PARTS NEEDED FOR INSTALLATION

• 2 Conduit Connectors

• Power Supply Cable

• 1 Wall or Roof Cap

• All Metal Ductwork

elbow is used. When installing ductless with a chimney kit, the euro hood