Dynaudio Audience A 62 Manual do Proprietário - Página 4
Procurar online ou descarregar pdf Manual do Proprietário para Altifalantes Dynaudio Audience A 62. Dynaudio Audience A 62 20 páginas. Audience series
Imprimir página
CONNECTING
To make the most of the Audience per-
formance, please consider the following
suggestions:
1. Connecting the loudspeakers
Connect a two-pole (+/-) loudspeaker
cable to the binding posts, located at
rear of the cabinet. The high quality,
gold plated binding posts can accom-
modate different connection systems:
4.0 mm banana plugs - The pins can be
put
directly
into
without any screwing necessary.
Cable spades - Un-tighten the binding
posts, insert the spade into the opening,
and secure the spade by tightening the
posts.
Bare wires - Un-tighten the binding
posts and place the cable into the bin-
ding posts. Tighten the posts.
With every connection system, ensure
that the contact is tight and has a pro-
per contact area. Connectors with simi-
lar gold plating as the Audience binding
04 Dynaudio Audience
posts will typically offer the best results
and remain corrosion-free. Please ensu-
re that the positive and negative cables
do not make contact with each other.
Tighten the posts, and check the con-
tact after a few days to make sure that
it hasn't loosened.
2. Connecting the amplifier
Connect the other cable ends to the
loudspeaker outputs of your switched-
the
binding
post
off power amp. Please make sure that
the red marked post of the speaker are
connected to the red marked output of
your amp, and the white or black mar-
ked post to the white or black marked
output accordingly.
When connecting a two-channel stereo
system, only the right and left channels
are connected to the amplifier.
In a surround set-up, center, side or rear
loudspeakers as well as a subwoofer
can be connected to provide for a multi-
channel listening experience. Please
refer to the amplifier's owner manual for
particular connection instructions.
Loudspeaker binding posts /
Lautsprecheranschlüsse
Power amp outputs / Verstärkeranschlüsse
Dynaudio loudspeakers feature a care-
fully fine-tuned frequency crossover,
using selected parts and an advanced
circuitry to achieve a truly balanced and
smooth frequency response. Therefore,
dividing the frequency sections through
bi-wiring or bi-amping is neither benefi-
cial nor optional.