HIGHLY LIQUID UMR2 Manual do utilizador - Página 7
Procurar online ou descarregar pdf Manual do utilizador para Conversor de multimédia HIGHLY LIQUID UMR2. HIGHLY LIQUID UMR2 11 páginas.
Imprimir páginaHighly Liquid
3.2.5 Matrix Polarity Jumper
CAUTION: Failure to set or incorrect setting of the Matrix Polarity Jumper can permanently
damage the UMR2 and host keyboard.
The Matrix Polarity Jumper serves two functions:
Configures the built-in resistors connected to all UMR2 Matrix Select and Matrix Data terminals
•
as either pull-up or pull-down resistors.
Controls the logic state (low or high) of signals generated by the UMR2 at the Matrix Data I/O
•
Terminals.
Use a piece of wire to connect only one side of the jumper as shown in the diagrams below.
Details for specific keyboards can be found at the
Active High Select / Common Anode Matrix
Use this jumper setting if the host
keyboard generates high-state logic
pulses at the select lines when
reading the switch matrix.
UMR2 built-in resistors act as pull-
downs.
Active Low Select / Common Cathode Matrix
Use this jumper setting if the host
keyboard generates low-state logic
pulses at the select lines when
reading the switch matrix.
UMR2 built-in resistors act as pull-
ups.
© 2012 Sonarcana LLC
UMR2 support
The
The
UMR2 RevC / V1.0
forum.
Page 7 / 11