DYNAVAC NovaDryer-DHF400 Manual de instalação e operação rápida - Página 12

Procurar online ou descarregar pdf Manual de instalação e operação rápida para Secador DYNAVAC NovaDryer-DHF400. DYNAVAC NovaDryer-DHF400 17 páginas. Vacuum freeze dryer

Imprimir página

If Vacuum Control Mode is chosen:

i.Please set Vacuum Upper Limit, Vacuum Lower Limit (In initial vacuum process. When chamber pressure≤Vacuum Lower

Limit, the system starts heating and inflating. When chamber pressure≧Vacuum Upper Limit, the system stops heating and

inflating. Vacuum Upper Limit 66Pa and Vacuum Lower Limit 33Pa are recommended.

ii.Set time for initial drying stage. 600 minutes is recommended. When initial drying time is reached, the system enters into

secondary drying stage.

iii.Set keeping (maintaining) pressure and time. When chamber pressure<keeping pressure, timing starts. When time reaches

keeping time set by the user, the system enters into the secondary drying stage.

iv. Set keeping (maintaining) temperature which can be understood as keeping (maintaining) time for the initial drying. 60℃ is

recommended.

After finishing above setting, press "Next" to set parameters for the secondary drying.

v. Set time for secondary drying. 600 minutes is recommended.

vi.Set temperature for secondary drying. 40℃ is recommended.

If Program Control Mode is chosen:

The user can program up to 18 sections. Set temperature and heat keeping (maintaining) time. Please input total number of all

the sections in RUN SECTION NO after setting is finished.