Galletti DST Manual técnico e de instalação - Página 5
Procurar online ou descarregar pdf Manual técnico e de instalação para Ventilador Galletti DST. Galletti DST 8 páginas. Air destratifiers
Também para Galletti DST: Manual técnico e de instalação (8 páginas)
Imprimir página
DST
6
HOW TO CHOOSE THE DESTRATIFIER
1) Set the units installation height in the environment.
2) Calculate the volume above the units and consider 5 volumes/hour of air
recirculation.
3) Select the unit with air flow rate equal or higher than the overall volume
to recirculate and the proper installation height.
EXAMPLE
dimensions of the building :
- width
40 m
- length 100 m
- height 7.5 m
Destratifier installation height 6 m
The volume above the destratifier is of 3000 sqm; recirculated air flow should
be at least 3000 x 5 = 15000 sqm/h.
The best choice is no. 3 DST 46.
40
All copying, even partial, of this manual is strictly forbidden
7
BEFORE STARTING INSTALLATION
Carefully read this manual.
Installation and maintenance may be carried out solely by qualified technicians
specifically trained for this type of equipment, in conformity with current
regulations.
On receiving the equipment, check that it has not undergone any damage
during transport.
8
INTENDED USE AND OPERATING LIMITS
Galletti S.p.A. will not accept any liability for damage or injury caused as a
result of:
- installation by non-qualified personnel;
- improper use or use in conditions not allowed by the manufacturer;
- failure to perform the maintenance prescribed in this manual;
- use of spare parts other than original factory parts.
The operating limits are:
Air inlet temperature: from -10°C to +40°C
Supply voltage: +/- 10%
usage outside the stated limits is to be considered improper.
5
AP66000443 - 02