DYNAVOICE CHALLENGER SERIES Manual do utilizador - Página 3

Procurar online ou descarregar pdf Manual do utilizador para Altifalantes DYNAVOICE CHALLENGER SERIES. DYNAVOICE CHALLENGER SERIES 5 páginas.

You will perceive the most accurate sound picture if you listen from a position halfway between the

loudspeakers, and three to four meters away. Avoid corner placement as it leads to coloration of the

lower frequencies. Image stability and stereo perception is increased if the two speakers are turned

slightly towards the listening position. Try this out and listen for best stereo image and centre focus.

Objects in the direct sound path can disturb the coherence of the sound picture. Try out different

positions before deciding on a final arrangement.

Surround system

For a front centre speaker position it directly above or below the screen, depending on screen

height. Optimum is in the same height as the front speaker sound centre (0.8-1m for floor

standing models)

Place the speaker 0.5-1m from the TV. For large projection screens, space speaker 0.1-0.5m from

screen. Try to follow the 2-channel position as close as possible in room for best sound image.

Depending on where you sit in the room there are two ways of presenting the sound image.

Direct or diffuse surround effect.

Direct is when the speaker point at the listening positions from rear or side walls, in the same

height as front and centre speaker.

For diffuse sound effect, mount the speaker higher and point them along rear or side wall.

Connections

Make sure to turn off all amplifiers before connecting your new speaker to your system.

Bi-wiring connection

Some DYNAVOICE speakers have 4-pole terminals allowing bi-wiring. This requires two cables for

each speaker and gives an audible improvement. Remove the connectors between low and high

sections of the terminal and connect according to the figure below.