Gallien-Krueger 400RB/112 Manual do Proprietário - Página 9
Procurar online ou descarregar pdf Manual do Proprietário para Amplificador Gallien-Krueger 400RB/112. Gallien-Krueger 400RB/112 16 páginas. High-current bass amplifier
Imprimir página
An electronically balanced output, that you can run
to your P.A. system.
Selects the direct out signal from before or after the
EQ.
A standard ¼" input jack and input attenuator
button. The button is generally left out, except in rare
cases when the clip LED flashes.
Set this switch to "On" when tuning up. No signal
will be sent to the speakers, or the P.A. system.
Sets pre-amp gain after the input stage. It is used in
conjunction with the input pad, to optimize the
amplifier's headroom.
Setting this button voices the pre-amp for basses with
"B" tuning. Leave it out and the amp is voiced like the
800RB, for 4 string basses.
Drops the mid-range frequencies while boosting lows
& highs.
Adds edge and definition to higher frequencies.
Boost and cut at 7kHz+14dB shelving type. Add or
remove edge and definition.
8 - H i g h
M i d :
Boost and cut at 1 kHz +6dB -10dB, "Q Optimized,"
band pass type. Works on lower string harmonics,
and effects the punch of your sound.
Boost and cut at 250Hz +6dB -10dB, "Q Optimized,"
band pass type. Works on the main body of your
sound.
Boost and cut at 60Hz +10dB, shelving type. Controls
low end push.
A post EQ gain stage using GIVE technology which
adds "growl" as it is turned up.
Controls output level of the amplifier.
Send and return jacks provided for the insertion of
effects after the EQ, but before the boost section.
Some effect units have gain, turning the BOOST
down, will compensate for this.
Output to tuner.
Turns the amplifier on or off. Should a problem
occur during operation press this switch out first.