Gallien-Krueger Fusion 550 Manual do Proprietário - Página 8
Procurar online ou descarregar pdf Manual do Proprietário para Amplificador Gallien-Krueger Fusion 550. Gallien-Krueger Fusion 550 12 páginas. Gallien-krueger fusion 550: user guide
Também para Gallien-Krueger Fusion 550: Manual do Proprietário (12 páginas)
Imprimir página
Horn Bi-Amp System (HBS):
Your amplifi er incorporates GK's unique HBS. This feature is automatically engaged when you con-
nect to a GK HBS compatible enclosure, giving you independent control of the tweeter and woofer
signals. Now you can push the woofers to the max while the tweeter remains clean, crisp, and free of
clipping distortion. A smooth tight tone is easily dialed in by adjusting the Horn and Woofer Master
controls on the amplifi er's front panel.
Horn Bi-Amp Mode:
Horn Bi-Amp compatible bass cabinet. Use a
properly wired four-conductor Speakon cable to
connect to your cabinet. Set the switch on the back
of your GK HBS compatible enclosure to Bi-Amp.
In this mode, the cabinet's internal crossover is
bypassed. Use the Woofer/Main knob to control
the output signal to the woofer, and the Horn knob
to control the output signal to the horn.
Note: The 50W horn amplifi er has a fi xed frequency
output of 5kHz and up (high frequencies only). It
will not provide a usable signal to drive a separate
speaker cabinet.
GK Speakon Cable Wire Confi guration:
1+ Woofer Amp +
1-
Woofer Amp -
2+ Horn Amp +
2-
Horn Amp -
Fusion 550 Bass Amplifi er
BI-AMP MODE
FULL RANGE MODE
This mode requires a GK
Full range Mode:
with virtually any standard bass cabinet. Use a
two-conductor Speakon cable or a ¼" speaker
cable to connect to your cabinet. If using a GK
HBS compatible enclosure, set the switch on the
back of the cabinet to Full range. In this mode,
the cabinet's internal passive crossover is used to
split the signal between the woofer and horn. Use
the Woofer/Main knob on the front of the amplifi er
to control your output level. The Horn knob is not
used.
Note: To avoid the risk of damage to the amplifi er,
do not use a four-conductor Speakon cable with non
GK cabinets. Instead use a two-conductor Speakon
or ¼" speaker cable.
CAUTION:
UNDER NO CIRCUMSTANCES
SHOULD THE WOOFER/MAIN AMP AND
THE 50 WATT HORN AMP BE CONNECTED
TOGETHER!!!
8
This mode is compatible