Frigidaire 900 Series Manual de utilização e cuidados - Página 6
Procurar online ou descarregar pdf Manual de utilização e cuidados para Máquina de lavar loiça Frigidaire 900 Series. Frigidaire 900 Series 20 páginas. Frigidaire gallery
Também para Frigidaire 900 Series: Manual de utilização e cuidados (20 páginas), Manual de utilização e cuidados (20 páginas), Manual de utilização e cuidados (20 páginas), Manual de utilização e cuidados (20 páginas), Manual de utilização e cuidados (20 páginas)
Imprimir página
Operating Instructions
(continued)
Options Selections
Hi-Temp Wash
When HI-TEMP
WASH
option
is selected,
the
dishwasher
heats water in the main wash to
approximately
140°F (60°C).
This increase
in water temperature
helps
dishwasher
detergent
remove food grease
and
soil from dishes
more effectively
and aids in
drying.
HI-TEMP
WASH option can be used with
all cycles except
CHINA CRYSTAL
and RINSE
HOLD.
HI-TEMP
WASH is automatically
provided
when POTS PANS cycle is selected.
When HI-TEMP
WASH
option
is selected,
the
light above the pad will come on and remain on
until end of cycle. To turn off the HI-TEMP
WASH
option,
press the pad a second
time. The light
above the pad will turn off.
Sanitize Option
To sanitize
your dishes
and glassware,
select the
SANITIZE
option. When selected,
the light above
the pad will come on and remain
on until end of
cycle. The water temperature
in the final rinse will
be raised to 150°F (66°C) and will maintain
that
temperature
for 9 minutes.
This option
is available
in Pots Pans, Normal and Light (Both Racks)
cycles.
The cycle time will be extended
until the proper
water temperature
is reached.
Washing
action will
continue
during the water heating
delay. For best
results, the incoming
water temperature
should
be
at least 120°F (49°C).
The sanitize
criteria
may not be satisfied
if there is
an interruption
of the cycle, power failure
or if the
incoming
water temperature
is below 120°F
(4g°c).
To turn off the SANITIZE
option,
press the pad a
second time. The light above the pad will turn off.
Power Dry Off/No Heat Dry
POWER
DRY OFF/NO
HEAT DRY option saves
electricity
since the heating element
is off during
drying
portion of cycle. When selected,
the light
above the pad will come on and remain on until
end of cycle. To speed the drying process,
open
the door slightly
after the cycle is complete.
Some
water droplets
may remain on door and tub and in
areas where
dishes touch silverware
basket
and
rack.
To select heated dry, press the pad a second
time. The light above the pad will turn off. Heated
dry provides
faster drying since the heating
element
is on during the drying
portion of the
cycle. With either option,
a fan circulates
the air
inside the dishwasher
to speed drying
(available
on some models).
You may see water vapor coming
from the vent
during the rinsing
and drying
portion of cycle. The
vent is closed during washing
to hold moisture
and
sound
inside. The vent opens during the last few
minutes
of the final rinse and remains
open for
drying.
The drying option
may be changed
at any
time during the cycle and affects only the drying
period.
Opening
the door longer than one minute during
the dry cycle cancels
the selected
dry program.
Delay Start
The DELAY
START
option allows you to delay
starting
your dishwasher
up to 9 hours or up to 6
hours (some models).
Press the DELAY
START
pad until the desired
delay time shows
in the STATUS
window.
On
models with 2-4-6 hour delay, press the pad once
for a 2-hour delay, twice for 4 hours and three
times for 6 hours. A light will come on indicating
the delay start hours and will remain
on until cycle
starts.
To cancel the DELAY
START
option and begin the
cycle before the delay period is over, press the
START/CANCEL
pad.
To Cancel a Cycle
You can cancel a cycle anytime during the cycle.
Press START/CANCEL
pad and the dishwasher
will start a 90 second drain. At the end of the
drain, select the desired cycle.