Gallien-Krueger MB200 Manual do Proprietário - Página 4
Procurar online ou descarregar pdf Manual do Proprietário para Amplificador Gallien-Krueger MB200. Gallien-Krueger MB200 10 páginas. Mb series
Também para Gallien-Krueger MB200: Manual do Proprietário (10 páginas)
Imprimir página
Safety Information
Please read all enclosed safety precautions
before connecting or operating this product.
Verify Line Voltage and Amperage
Your amplifier has been factory configured for
use with the specific line voltage for your
location only. For example, units set to operate
within countries that supply 100-120 volt
electrical service are not compatible with
230-240 volt systems used in other
countries.
120 Volt/60Hz 15 amp circuit for the USA
and
Canada.
230 Volt/(50/60Hz) 10 amp circuit for the UK
and Australia.
230 Volt/(50/60Hz) 10 amp circuit for Europe.
100 Volt/50Hz 15 amp circuit for Japan.
220 Volt/50Hz 10 amp circuit for Korea.
Proper AC circuit for all other countries.
Connecting the amplifier to a line with
specifications other than indicated above can
create safety and fire hazard, and may damage
the amplifier. If you have any questions about
the voltage requirements for your specific
model, or about the line voltage in your area,
contact your dealer before plugging the unit
into a wall outlet.
Verify AC Circuit Capacity Before Use:
The high power output of your amplifier may
require heavy current draw under full-load
conditions. To insure proper performance and
avoid potential safety hazards, we recommend
connection to line circuits with amperage
specified "as above". Connecting to the same
circuit used by other heavy-power devices,
such as high-wattage lights, may cause circuit
breakers to trip. It is always a good idea to avoid
using any audio equipment on the same AC circuit
as equipment with motors, such as air conditioners
or refrigerators. This will lessen the possibility of
power variation and electrical start-up noise
affecting your sound.
Please refer to page 10 for more instructions
concerning installation.
MB 200
AC Power Cord:
To avoid safety hazards, use only the power cord
supplied with your unit. If a replacement cord is
needed, make certain to use a standard IEC
compliant cord. Damaged power cords should
be replaced immediately. When setting up, make
certain that the AC plug is easily accessible. If you do
not intend to use the amplifier for a considerable
length of time, disconnect the plug from the AC
Mains Socket. Do not use an extention cord.
Earth Grounding Connection:
To prevent electric shock, do not remove the
grounding plug on the power cord, or use any plug
or extension cord that does not have a grounding
plug provided. Make certain that the AC outlet
is properly grounded as well. Do not use an
adapter plug with this product.
Do Not Open the Amplifier Enclosure:
There are no user serviceable parts inside this
product. Opening the amplifier enclosure may
present a shock hazard. Modification to the
product will void your warranty. If liquid enters
the unit, or any metal object such as a paper
clip accidentally falls inside the enclosure,
disconnect the unit from the AC power source
immediately and consult an authorized service
station.
Setup:
To insure proper operation and to avoid
potential safety hazards, place the unit on a firm,
level surface. Do not plug or unplug the
instrument or speaker cable while the amplifier
power is on.
Heat & Ventilation:
Make sure there is space provided for proper
ventilation. Avoid using in extremely hot or
cold locations and areas that are exposed to
direct sunlight or near heating equipment. Avoid
using in moist or high humidity areas. NEVER
BLOCK THE FAN VENT HOLES ON
THE SIDES OF THE UNIT.
4