HighSecLabs SM20-4 Manual de instalação rápida - Página 2
Procurar online ou descarregar pdf Manual de instalação rápida para Interruptor HighSecLabs SM20-4. HighSecLabs SM20-4 2 páginas. 2/4/8 ports high security km switches
Imprimir página
Front Panel LEDs :
1.
Active PC channel LED
2.
Keyboard LEDs Num/CAPS/SCRL
Safety and Regulatory Statements
Safety Symbols
This One or more of the following symbols may be included in your
product documentation and/or on the product.
Instructions: This symbol is intended to alert the user to the
presence of important operating and maintenance (servicing)
instructions in the product user manual.
Dangerous Voltage: This symbol is intended to alert the user
to the presence of uninsulated dangerous voltage within the
product's enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
Power On: This symbol indicates the principal on/off switch is
in the ON position.
Power Off: This symbol indicates the principal on/off switch is
in the OFF position.
Protective Grounding Terminal: This symbol indicates a
terminal which must be connected to earth ground prior to
making any other connections to the equipment.
Safety Precautions
WARNING: To avoid a potentially fatal shock hazard and possible
damage to equipment, please observe the following precautions.
•
Instructions: Do not disable the power grounding plug. The
grounding plug is an important safety feature.
•
Plug the power cord into a grounded (earthed) outlet that is easily
accessible at all times.
•
Disconnect the power from the product by unplugging the power
cord from either the electrical outlet or the product. The AC inlet
is the main disconnect for removing power to this product. For
products that have more than one AC inlet, to remove power
completely, all AC line cords must be disconnected.
•
This product has no serviceable parts inside the product
enclosure. Do not open or remove product cover.
©2019 All rights reserved. HSL logo and product names are trademarks or service trademarks of HighSecLabs Ltd (HSL).
All other marks are the property of their respective owners. Images for demonstration purposes only.
KM LED Indications:
HID LED:
•
Off – no device detected
•
Flicker – device rejected
•
On- device approved
CAUTION: Some HSL products contain a lithium battery. This battery
is not a field replaceable item, and replacement should not be
attempted by a user. If errors occur when using the product and the
battery is suspected, contact HSL Technical Support.
WARNING: For Service Personnel Only - There is a risk of explosion if
the battery is replaced with an incorrect type. Dispose of used
batteries according to the manufacturer's instructions.
This product is for use with other products that are Listed or
Certified by a Nationally Recognized Testing Laboratory (NRTL).
NIAP Protection Profile
This product is certified to the NIAP Protection Profile PSD version
4.0 certification for peripheral sharing switch devices.
Security Vulnerability
If you are aware of a potential security vulnerability while installing
this product, contact Technical Support immediately by:
•
Web form: www.highseclabs.com/support/case/
•
Email: [email protected]
•
Tel: +972-4-9591191/2
CAUTION: Anti-tamper Caution - This product is equipped with an
always-on, active anti-tampering system. Any attempt to open the
product enclosure will activate the anti-tamper triggers, rendering
the unit inoperable and voiding its warranty.
WARNING: Unit Enclosure Warning - If the unit's enclosure appears
disrupted or if all LEDs flash continuously, remove the product from
service immediately and contact Technical Support.
Change Management
For change management tracking, perform a quarterly log check to
verify that the RFD was not improperly used to override the current
device policy by an unauthorized person.
| QUICK INSTALLATION GUIDE
SM20-4 SM40-4 SM80-4
Keyboard LEDs:
•
Each LED is ON when the associated
keyboard lock of the active channel
is turned ON
HDC22995 Rev.1.0