Frigidaire Designer Series Manual do Proprietário - Página 8

Procurar online ou descarregar pdf Manual do Proprietário para Máquina de lavar loiça Frigidaire Designer Series. Frigidaire Designer Series 20 páginas. Electronic control a/c
Também para Frigidaire Designer Series: Manual de utilização e cuidados (11 páginas), Factos sobre o produto (1 páginas), Manual do Proprietário (14 páginas), Manual de utilização e cuidados (20 páginas), Manual de utilização e cuidados (20 páginas), Manual de instruções de instalação (8 páginas), Manual de utilização e cuidados (13 páginas), Manual de utilização e cuidados (11 páginas), Manual de utilização e cuidados (20 páginas), Manual de utilização e cuidados (20 páginas), Manual do Proprietário (12 páginas), Manual do Proprietário (14 páginas), Manual de utilização e cuidados (11 páginas), Manual de utilização e cuidados (11 páginas), Manual de utilização e cuidados (11 páginas), Manual de utilização e cuidados (20 páginas)

Imprimir página
Frigidaire Designer Series Manual do Proprietário
Setting
Oven
Controls
To Bake
The oven can be programmed to bake at any temperature from 135°F/57°C to
550°F/288°C. Preheating the oven is recommended when baking, but is not necessary
when roasting or cooking casseroles. Follow the recommendations in the recipe.
1. Arrange oven racks while the oven is still cool.
2.
Push the BAKE pad. '....
and the word "Bake" will glow in the
display.
3.
Push the Increase ( A ) or Decrease ( Y ) pad until the desired baking
temperature appears in the display. When setting the baking temperature, the
temperature will start in at 325%/163°C and increase or decrease in increments
of 5°F/2.5°C.
As soon as the bake temperature is set, the oven will begin heating to the selected
temperature. The display will show the temperature and the words "Bake" and
"On" will appear in the display. Preheating the oven takes 10-12 minutes. When the
displayed temperature reaches the desired baking temperature, the oven is ready for
baking. Only "Bake" is displayed. The word "On" will appear in the display when
the bake element is on.
4. When cooking is finished, push the CANCEL pad.
To change the baking temperature after baking has begun, repeat steps 2 & 3
above.
To cancel the baking function, push the CANCEL pad.
To Set the
Automatic
Timer
(timed
bake
feature)
The BAKE TIME and STOP TIME pads control the timed bake operation. The
automatic timer will turn the oven on and off at the times you select in advance.
The oven can be programmed to start immediately and turn off automatically; or
to start at a delayed time and turn off automatically.
To Start
the
Oven
Now
and
Stop
Automatically
1.
Be sure the clock is set to the correct time of clay, asthis controls the automatic
timing.
2.
Arrange oven racks while the oven is still cool, and place the food in the
oven.
3.
Pushthe BAKE TIME pad. "
" and the words "Bake Time" will glow
in the display.
4.
Push the Increase ( A ) or Decrease (_')
pad until the desired baking time
appears in the display. The baking time can be set for any amount of time from
5 minutes to 11 hours and 50 minutes in 5 minute increments.
5.
Push the BAKE pad. '....
will flash and the word "Bake" will glow in
the display.
6.
Push the Increase ( A ) or Decrease ( Y ) pad until the desired baking
temperature appears in the display. When setting the baking temperature, the
temperature will start in at 325°F/163°C and increase or decrease in 5°F/2.5°C
increments. If the baking temperature is not set, the control will beep once.
,,_
o,,
will flash, and the words "Bake" will appear in the display.
As soon as the controls are set, the oven will come on and begin heating to the
selected baking temperature. The words "Bake" and "On" will appear in the display.
The main display will show the oven baking time and will count clown by minutes
until it reaches "00." When the set bake time runs out, the control will beep 3 times.
"00" will appear in the display window. The control will then continue to beep once
every 10 seconds for 5 minutes or until the CANCEL pad is pushed.
Note: To cancel the timer setting during the cycle, push the Decrease (_!,) pad
until "00" appears in the display window.