HighSecLabs SM80N/NU-3 Manual de instalação rápida
Procurar online ou descarregar pdf Manual de instalação rápida para Interruptor HighSecLabs SM80N/NU-3. HighSecLabs SM80N/NU-3 2 páginas. 2/4/8 ports high security km switches
Imprimir página
Quick Installation Guide
2/4/8 Ports High Security KM Switches
Objectives
• This guide includes instructions for installing HSL SM20N-3,
SM40N/NU-3, SM80N/NU-3 KM devices.
• A KM allows sharing keyboard, mouse, audio and USB
peripherals between multiple computers.
• For further assistance please refer to HSL website:
http://www.highseclabs.com.
SM40NU-3 Model is shown
Connect peripherals to the KM
Console ports
• Keyboard: Connect either a USB or PS/2
keyboard to the corresponding KM
console keyboard port.
• Mouse: Connect either a USB or PS/2
mouse to the corresponding KM
console mouse port.
• Audio peripherals: Connect
headphones / speakers to the KM
console audio-out port.
• USB peripherals: Connect USB
peripherals to the KM console fUSB port.
Note: authentication devices such as
smartcard and biometric readers are enabled
by default, other devices must be explicitly
whitelisted – for further information please
refer to the KM Administrator's guide.
Connect computers to the KM
Computer ports
• Computer keyboard & mouse
connection: Connect each computer
to the KM keyboard & mouse computer
port using a USB A to USB B cable.
Connect the USB A end to the computer
and the USB B end to KM.
• Computer audio connection:
Connect each computer to the KM
audio-in port using an audio cable.
Connect one end of the cable to the
computer's audio-out port using the
1/8" (3.5mm) stereo plug. Connect the
other end of the audio cable to the KM
audio-in computer port.
©2017 All rights reserved. HSL logo and product names are trademarks or service trademarks of HighSecLabs Ltd (HSL).
All other marks are the property of their respective owners. Images for demonstration purposes only.
SM20N-3 • SM40N/NU-3 • SM80N/NU-3 | QUICK INSTALLATION GUIDE
General
• Verify that all peripherals and computers are turned off prior to
connecting them to the product.
• The KM's back panel is divided into Console Ports and Computer
Ports sections.
– Connect peripherals which are due to be shared by the KM to
the Console ports.
– Connect computers that require access to the shared
peripherals to the Computer ports.
1
• Computer USB peripherals:
Connect each computer to the KM fUSB
computer port using a USB A to USB B
cable. Connect the USB A end to the
computer and the USB B end to KM.
• Computer video connection:
Directly connect a monitor to each
computer. Multi-monitor computers
require driver installation, currently
available only for Windows (http://
highseclabs.com/dl.php?fid=446).
Power ON your system
• Power ON the system:
Connect all peripherals and computers to
the KM prior to powering it up. Power ON
the KM by plugging it to the AC wall outlet.
4
2
By default, after product power-up,
the active channel will be computer #1,
indicated by the applicable front panel
push button LED lit.
Note: Power ON self-test: As the product
powers-up it performs a self-test procedure.
In case of self- test failure for any reason,
including jammed buttons, the product will be
Inoperable. Self-test failure will be indicated
by abnormal LED behavior – for further
information please refer to the KM setup guide.
Switching between computers
• Switch between computers by pressing
the corresponding front panel button
on the KM. The front panel button of
the selected computer will illuminate.
3
HDC14188 Rev. 1.2