Emerson Network Power M222S Manual do utilizador - Página 12

Procurar online ou descarregar pdf Manual do utilizador para Controlador Emerson Network Power M222S. Emerson Network Power M222S 20 páginas.

Chapter 2 Installation, Replacement And Power-On

2.1.3 Controller Installation/Replacement

1. Loosen the captive fastener securing the top of the latch mechanism to the front of the controller to be installed.

Pull the top of the latch mechanism away from the controller (this will retract the latch mechanism located on the

underside of the controller).

2. Slide the controller completely into its mounting position.

3. Push the top of the latch mechanism into the front panel of the controller, and secure by tightening the captive

fastener. This locks the controller securely to the shelf.

1. Perform the next procedure, 'Initially Starting, Configuring, and Checking Controller Operation'.

2. Enable the external alarms, or notify appropriate personnel that this procedure is finished.

3. Ensure that there are no local or remote alarms active on the system.

After power is first applied to the controller, the following initialization routine is performed.

Procedure

1. After the controller is powered on, the language screen appears.

Press the ▲, or ▼ key to select the desired language. Press ENT key to confirm the selection. If no key is pressed

within 10 seconds, the controller selects the displayed language automatically.

2. The controller displays 'Wait...' as it performs an initialization routine. The controller has a 'System Type' parameter

that was pre-programmed for your specific system. This setting determines the initial configuration of the controller

parameters such as output voltage and alarm levels.

3. Once initialized, the Main screen is displayed. Note that at the top of the screen the date and time are alternately

displayed.

英语

English

Figure 2-2

Language screen

Wait....

Figure 2-3

Wait screen

18:15:10

Float

53.5V

7.8A

Auto

Alarm

Figure 2-4 Main screen

LCU+ Series Controller User Manual

2009-07-28

Float

53.5V

7.8A

Auto

Alarm