Agrowtek SXG Manual de instruções - Página 3

Procurar online ou descarregar pdf Manual de instruções para Acessórios Agrowtek SXG. Agrowtek SXG 7 páginas. Co2 gas sensor

Installation Instructions

SXG sensors are designed for indoor wall mounting near ground level for monitoring carbon dioxide con-

centration limits. Consult your local authority for the quantity and location requirements for sensors and

alarm modules. Typical requirements are outlined below.

Installation Location Requirements:

• Intake fan to be no more than 12" from the floor.

• Locate the sensor on the wall furthest from the entry way.

• Locate the sensor near the center of the wall.

• Avoid areas with condensation or water spray.

• Always mount the RJ-45 connection on the bottom to avoid water ingress through the connection.

FLOOR

Installation Notes

NOTICE

GrowNET™ ports use standard RJ-45 connections but are NOT compatible the Ethernet network equipment.

Do not connect GrowNET™ ports to Ethernet ports or network switch gear.

DIELECTRIC GREASE

Dielectric grease is recommended on RJ-45 GrowNET™ connections when used in humid environments.

Place a small amount of grease onto the RJ-45 plug contacts before inserting into the GrowNET™ port.

Non-conductive grease is designed to prevent corrosion from moisture in electrical connectors.

• Loctite LB 8423

• Super Lube 91016 Silicone Dielectric Grease

SXG

GAS Sensor

aspirated

MADE IN

U.S.A.

• Dupont Molykote 4/5

AGROWtEK

Technology to Help You Grow

PPM

keep filter clean

GrowNET

Link Port

www.agrowtek.com

Reset

MDOBUS RTU

• CRC 05105 Di-Electric Grease

• Other Silicone or Lithium based insulating grease

12" Max.