Cora Bike Rack CBLV-LD Manual de instruções de instalação e montagem - Página 3

Procurar online ou descarregar pdf Manual de instruções de instalação e montagem para Mobiliário de interior Cora Bike Rack CBLV-LD. Cora Bike Rack CBLV-LD 7 páginas. Vertical bike locker

Imprimir página

Locker Installation & Assembly Instructions

Cora Bike Rack - Vertical Bike Locker (CBLV-LD)

4. Position adjustable foot inside frame before fixing to ground

• After base frame has been levelled by adjusting corner feet, ensure foots final position is located inside

structure of base frame

• Hole on adjustable foot, is to be used for anchor bolt fixing of frame to ground and cannot be located

outside of frame (for security anchor bolts to be inside locker frame structure when installed).

5. Drill holes in ground for location of anchor bolts

• Option 1: Leave base frame in place and drill holes for anchor bolts directly trough hole in adjustable

levelling feet.

• Option 2: Use holes in adjustable levelling feet to mark location of holes for anchor bolts. Mark holes while

base frame is in correct position. Move frame away and drill holes

• Drill or core a hole using a 13mm diameter drill bit to 120mm min. depth

6. Install Anchor bolts, fix base frame to ground

• Locate frame in position with holes in adjustable feet, over drilled holes in ground, knock anchor bolts (x4

one for each corner of frame) into ground through holes in adjustable feet.

• Check level of frame.

• Tighten anchor bolts with standard supplied nut

• After anchor bolt nut is tightened fully, install supplied shear nuts (x4 one per anchor bolt) onto top of

thread

• Tighten shear nuts until head snaps off

Cora Bike Rack - Australia's Bike Parking Experts - WWW.CORA.COM.AU - PH 1800 249 878

inside

frame

outside

frame

anchor bolt

mounting hole

After Anchor bolt install