Maidaid Halcyon AMIKA 91XL Manual de instalação do utilizador - Página 7
Procurar online ou descarregar pdf Manual de instalação do utilizador para Máquina de lavar loiça Maidaid Halcyon AMIKA 91XL. Maidaid Halcyon AMIKA 91XL 13 páginas.
Imprimir página
UK
Referring to Fig.1:
1
ON/OFF BUTTON
2
PROGRAMME SELECTION BUTTON
3
START BUTTON
Referring to Fig.2:
•
Turn on the main power switch and open the external water tap.
•
Check the presence of the overflow, where foreseen.
•
Press ON/OFF (1).
•
Loading begins automatically when the machine is switched on.
•
The orange light on the STATE BAR (5) runs downwards and the point on the display flashes until
the machine has completely filled.
•
When the working temperature is reached, the STATUS BAR (5) stays on, lit in green as shown in
the figure.
•
The optimal wash conditions have been reached
•
In the event of a fault, the led bar flashes red and stops the machine operation; a minor error is
indicated in orange, and will not stop the machine cycle.
Fig. 3
Referring to
, to ensure the correct operation of the dishwasher follow the rules described below:
•
Use a suitable rack, fill without overloading and without overlapping the dishes.
•
Always wipe the dishes before placing in the dishwasher; do not put dishes with dry or solid
residues in the washer.
•
Place the empty dishes in the rack facing downwards.
•
Place plates and the like in the sloping rack, with the inner surface facing upwards.
•
Place the cutlery in the cutlery basket, handle end down.
•
Do not place silver and stainless steel cutlery in the same cutlery basket as this will turn the silver
brown and may corrode the steel.
•
Wash the dishes immediately after use, in order to prevent any residue from hardening and sticking
on them.
•
Use only solid, dishwasher-proof dishes.
•
Press the PROGRAMME SELECTION button (2) repeatedly to select a wash cycle that is suitable
for the dishes to be washed; the display will show the cycle number chosen (Fig. 4).
•
To run the programme, press START (3); the STATUS BAR (5) starts to flash orange, increasing
from the bottom upwards to indicate the progression of the cycle.
•
When the cycle is over, Ed appears on the display to indicate the end of the cycle.
•
For rapid drying, remove the rack from the machine as soon as the cycle finishes.
•
To stop a wash cycle early, press START (3).
N.B. In hood versions, after the first work cycle the automatic start is automatically enabled; the
subsequent cycles will be enabled automatically when the hood is closed. This operating mode
is marked on the display by "AS".
Page 6 of 12
INSTRUCTION MANUAL FOR DISHWASHERS
Chap 4 USING THE MACHINE
4 INFORMATION DISPLAY
5 STATUS BAR (LED)
4.2
Switching the dishwasher on
4.4
Cycle selection and start-up
4.1 Key and symbols
4.3