Dynex DX-E202 Manual do utilizador - Página 7

Procurar online ou descarregar pdf Manual do utilizador para Placa de rede Dynex DX-E202. Dynex DX-E202 12 páginas. User manual (french)
Também para Dynex DX-E202: Perguntas frequentes (4 páginas), (Guia de instalação (16 páginas), (Francês) Guide D'installation (16 páginas)

10/100Mb CardBus Network Card

To ping the network card:

1 Click Start, then click Run. The Run dialog box opens.

2 Type cmd in the Open box, then click OK. The command window opens.

3 Type ping xxx.xxx.xxx.xxx (where xxx.xxx.xxx.xxx is the IP address you want to

ping). In this case, computer B with the IP address=192.168.0.1 is being pinged from

computer A.

4 Press Enter to begin pinging. If the connection is good, you receive four "Reply from"

messages.

5 Type exit at the prompt to return to Windows.

Specifications

Standards

Network media

Protocol

Host interface

LEDs

Network data

Transfer rate

Operating temp

Humidity

System support

IEEE 802.3 10Base-T Ethernet

IEEE 802.3u 100Base-TX Fast Ethernet

ANSI/IEEE 802.3 NWay auto-negotiation

PCMCIA 2.x

Ethernet: UTP Cat3, 4, 5, EIA/TIA-568 100-ohm

Fast Ethernet: UTP Cat5, EIA/TIA-568 100-ohm

CSMA/CD

32-bit CardBus

Link/Activity

Full duplex

Ethernet: 10 MBps (half-duplex)

Ethernet: 20 MBps (full-duplex)

Fast Ethernet: 100 MBps (half-duplex)

Fast Ethernet: 200 MBps (full-duplex)

32°F~104°F (0°C~40°C)

Operating: 10%~90% RH, non-condensing

Storage: 5%~90% RH, non-condensing

Microsoft Windows 7, Vista, XP, 2000, and Mac OS X v10.4.0 or higher