Coralife Bio Cube Manual de instruções - Página 8

Procurar online ou descarregar pdf Manual de instruções para Acessórios Coralife Bio Cube. Coralife Bio Cube 12 páginas. Size 16
Também para Coralife Bio Cube: Manual de instruções (13 páginas)

Imprimir página

Safety Precautions:

1. Do not plug BioCube into an outlet or power

source until setup and installation is completed.

2. Visually inspect the aquarium and canopy prior to

installation to make sure it has not been damaged.

Canopy Assembly

1. Lift canopy from aquarium and visually check the

assembly to verify that the light lens cover,

compact fluorescent lamps and LED bar have not

been broken, damaged or dislodged (Figure 7).

2. Make sure that lamps are securely inserted into the

compact fluorescent endcaps and that the retaining

bands are attached to the lamp clips holding the

compact fluorescent lamps in place.

FIGURE 7

Polished Reflector

Compact Fluorescent

Endcaps

Compact Fluorescent

Lamps

Silicon Retaining

Bands

Light Lens Cover

Canopy Assembly

ASSEMBLY

Wet/Dry Filter Assembly

1. Make sure that the BioCube filter cartridge is

properly inserted at the 1st chamber of the wet/

dry section (Figure 8).

2. Make sure that the overflow tray, bio-balls and

bio-ball strainer are properly placed inside the 2nd

chamber of the wet/dry section.

3. Make sure that the sponge filter is correctly placed

in the 3rd chamber of the wet/dry section.

4. Make sure that the water pump is properly

assembled and connected to the wet/dry return

output.

FIGURE 8

Lamp

Filter Cartridge

Clips

Overflow Tray

Bio-Balls

Bio-Ball Strainer

Water Pump

Sponge Filter

LED Bar

Aquarium Divider

Wet/Dry Return Output

Surface Intake

Bottom Intake

Wet/Dry Filtration

Assembly