AGS Mini Merlin LPGCO Manual do utilizador - Página 3

Procurar online ou descarregar pdf Manual do utilizador para Detectores de gás AGS Mini Merlin LPGCO. AGS Mini Merlin LPGCO 16 páginas. Dual gas monitor, liquid petroleum gas (lpg) & carbon monoxide (co)

AGS Mini Merlin LPGCO Manual do utilizador
MINI MERLIN LPGCO
1.

About your new Mini Merlin device

Your new Mini Merlin is a dual gas sensor carefully designed and tested to monitor levels of
Liquid Petroleum Gas (LPG) and Carbon Monoxide (CO) in the air.
If there is a dangerous build-up of gas or unsafe levels of carbon monoxide at the sensor, this
device can shut off the gas supply via a gas safety valve and/or a gas fired appliance.
This device has additional features for resetting systems, as well as audible and visual alarms -
It can also be integrated with a Building Management System (BMS).
The information contained within this guide should be referenced for typical installation and
operation only. For site specific requirements that may deviate from the information in this
guide – contact your supplier.
Please take the time to thoroughly read this user's guide which should be retained for future reference.
The expected lifetime of gas sensor elements is 5 years upon initial power up.
The device will display a message to indicate this time and should immediately be replaced.
It is recommended that this device be commissioned upon installation and serviced annually.
Do not apply lighter gas or other aerosols to the device – this will cause extreme damage.
High concentrations of alcohol/ ethanol found in many products may damage, deteriorate or affect
the gas sensing elements – Avoid exposure near your device.
This device is designed to detect carbon monoxide and natural gas from any source of combustion.
It is NOT designed to detect smoke, fire or other gases and should NOT be used as such.
This device provides early warning of the presence of LPG or CO gas, usually before a healthy adult
would experience symptoms. This early warning is possible provided your alarm is located, installed and
This device requires a continual supply of electrical power – it will not work without power.
This device should not be used to substitute proper installation, use and/or maintenance of fuel burning
appliances including appropriate ventilation and exhaust systems.
This device does not prevent LPG or CO gas from occurring or accumulating.
Actuation of your alarm indicates the presence of dangerous levels of LPG or CO.
Seek fresh air supply and contact your local gas emergency service should you suspect a gas leak.
This unit may not fully safeguard individuals with specific medical conditions.
Your product should reach you in perfect condition, if you suspect it is damaged, contact your supplier.
Rev: 03 05-19
Important Warning Statements
maintained as described in this guide.
Never ignore your device when in alarm.
If in doubt, consult a doctor/physician.
USER GUIDE
3