Adesso BROOME ARC LAMP 6304-01 Instruções de montagem

Procurar online ou descarregar pdf Instruções de montagem para Luz exterior Adesso BROOME ARC LAMP 6304-01. Adesso BROOME ARC LAMP 6304-01 2 páginas.

Imprimir página

LAMPSHADE patent

USA: US 8,292,476

China: ZL2008200007 99.4

EU: 08014421.5-2423

Japan: 3145825

aiwan: M350672

DE: 20 2014 007 328.7

Pole #2

Connecting rod

Pole #3

Pole #4

Small

tube

Allen Key

Screw

Pole#6

Washer#1

Base

Washer #2

Washer #3

Screw nut

Wrench

ASSEMBLY INSTRUCTIONS FOR

BROOME ARC LAMP

Model # 6304-01

End cap

Pole #5

Small tube

Top metal frame

Shade fabric

Bottom metal frame

Pole #1

Socket

Socket ring

Bulb

(Not Included)

100 Watt

Plug

On/o foot switch

1. Shade assembly: Line up the velcros of top and

bottom metal frames along side velcros of shade

fabric, then roll the metal frames up to let the

velcros connect tightly. This is easier with 2

people. If you are alone, do this slowly and

carefully.

2. Place the shade onto the socket and screw on

socket ring to secure the shade.

3. Install the bulb (Not Included) by screwing it into

the socket. Refer to the label on the lamp socket

for maximum wattage information. NOTE: It is

easiest to assemble the bulb at this step, so that

you can reach in from the top of the shade.

4. Screw pole #2 onto pole #1.

5. Install pole #6 into base with washer #1, #2 and #3

then ﬁx using screw nut.

6. Insert pole #5 into pole #6 and use screws to

secure the poles together.

7. Screw connecting rod onto pole #2.

8. Place connecting rod through pole #3 and screw

on pole #4 to secure the arching arm all together.

9. Insert the end cap onto pole #4.

10. Gently pull all the electrical cable, then tighten

it up at the small tube.

GENERAL PRODUCT INFORMATION:

This product is suitable

for dry locations only.

IMPORTANT SAFETY INSTRUCTIONS:

This portable lamp has a polarized plug (one

blade is wider than the other) as a feature to

reduce the risk of electric shock. This plug will ﬁt

in a polarized outlet only one way. If the plug does

not ﬁt fully in the outlet, reverse the plug. If it still

does not ﬁt, contact a qualiﬁed electrician. Never

use with an extension cord unless plug can be

fully inserted. DO NOT ALTER THE PLUG.

BULB TYPE: (1) 100Watt

PARTS DIAGRAM:

(2) Screws

(1) Screw nut

(1) Allen key

(1) Wrench

(3) Washers

353 West 39th Street – 2nd Floor

Tel: (212) 736 4440 Fax: (212) 736 4806

6304-01

1.0

New York, NY 10018