Galvin Specialised Flowmatic TZ-FLOW225866 Manual de instalação do produto - Página 2
Procurar online ou descarregar pdf Manual de instalação do produto para Acessórios Galvin Specialised Flowmatic TZ-FLOW225866. Galvin Specialised Flowmatic TZ-FLOW225866 10 páginas. Wall mounted sensor tap battery operated/single temp
Imprimir página
TOOLS REQUIRED
−
Thread tape
−
Adjustable spanner
PRE-INSTALLATION
PREPARATION FOR INSTALLATION
Flush the water supply lines thoroughly before installing the faucet. Do not allow dirt, thread tape or metal
–
particles to enter the faucet. Shut off water supply.
Drill 28 -29 mm of hole at desired place to install the faucet.
–
WARNING
1) To avoid reflection problems, keep a distance of more than 300 mm
between the sink and the spout.
2) This faucet model, with an infrared sensor pointing down, is not
intended to be used together with a sink of a reflective material such as
stainless steel.
3) If a sink strainer is straight below the faucet sensor, use a strainer with
a non-reflective finish (do not use a chrome plated one).
th
Version 2, 16
March 2021, Page 2 of 9