MAIMAN ELECTRONICS SF6040 Manual do utilizador - Página 19

Procurar online ou descarregar pdf Manual do utilizador para Accionamentos DC MAIMAN ELECTRONICS SF6040. MAIMAN ELECTRONICS SF6040 20 páginas. Laser diode driver

Imprimir página

Maiman Electronics

Binary mode

The binary mode has a significant difference. In this mode, data are exchanged in binary

form. Length of any type of command is 8 bytes! In this mode, next options are always enable and

you cannot disable it: return a new value of parameter for P-type commands and checksum. The

format of binary mode commands is represented in table 8.

The format of binary mode commands

Number of byte

2-3

4-5

Value

Type of command

Number of parameter

Value of parameter

'return carriage' symbol <CR>

(0Dh)

Checksum

'new line' symbol <LF> (0Ah)

Comment

50h (P - ascii) – Set a new value of parameter

4Ah (J - ascii) – Get a value of parameter

4Bh (K - ascii) – Answer of the device

45h (E - ascii) – Error

Hex-number of parameter

Hex-value of parameter. This value is STRICTLY

REQUIRED in the binary mode. If this value

does not make sense, it will be returned as

0000 (K or E-type commands) or you should set

it field to any value (for P or J-type commands).

End of value

CRC checksum of the first 11 bytes (for J and E-

type commands checksum is computed for the

first 6 bytes), including <CR> symbol.

End of command

SF6040