Main Combi 30 HE Manual do utilizador - Página 8

Procurar online ou descarregar pdf Manual do utilizador para Aquecedor Main Combi 30 HE. Main Combi 30 HE 12 páginas. Main gas heater

Imprimir página

5mm Min

450mm Min

For Servicing

Purposes

5mm Min

In Operation

450mm

200mm Min

5.0 Clearances

20mm/5mm Min

5.1

For your Safety

see *NOTE:

1. This appliance must have been installed in accordance

with the manufacturer's instructions and the regulations

in force.

2. Any modification that may interfere with the normal

operation of the appliance without express written

permission from the manufacturer or his agent could

invalidate the appliance warranty. In GB this could also

infringe the Gas Safety (Installation and Use) Regulations.

GB - Heating Industry definition meaning England, Scotland,

Wales, Northern Ireland, Isle of Man and the Channel Isles

3. Your boiler must not be operated without the casing

correctly fitted.

4. Do not interfere with any sealed components on this

780mm

boiler.

5. Take note of any warning labels on your boiler.

6. Your boiler should have the following minimum

clearances for Safety and Maintenance

(Fig. 34):-

Top

Bottom

Left side

Right Side

Front

*NOTE: The boiler can be operated with a clearance

of 5mm at the right. This is also sufficient for routine

maintenance. However a clearance of 20mm is

required if it is necessary to remove the secondary

heat exchanger. This should be considered when

siting the appliance and in the event of any

subsequent alteration in the area of installation.

7. If your boiler is installed in a compartment, do not use

it for storage purposes. Do not obstruct any purpose

provided ventilation openings.

8. Flammable materials must not be stored in close

proximity to your boiler.

9. Avoid skin contact when your boiler is in operation, as

some surfaces may get hot e.g. pipework.

10. Ensure that the flue terminal, outside the house,

does not become damaged or obstructed, particularly

by foliage.

11. It is important that the condensate drain system is

not blocked, modified or damaged in any way as this

would affect the operation of your boiler. Your installer

should have insulated any exposed pipework.

- 200mm

- 5mm

- 5mm (In Operation)

- 450mm (For Servicing)