GAMA Electronics RF340-DRC Manual de instruções - Página 3

Procurar online ou descarregar pdf Manual de instruções para Recetor GAMA Electronics RF340-DRC. GAMA Electronics RF340-DRC 3 páginas.

WWW.GAMAINC.COM

All remote-control systems shipped by GAMA Electronics are 100% functionally tested just prior to shipment.

If your RF remote control system does not work out of the box, stops working or functions intermittently please take the

following steps to resolve common issues. Please note that you must be 2-3 feet away from the receiver when operating

the remote control. Operating within 2-3 feet may result in no operation or intermittent operation.

1. Replace the A23 12V Battery in the transmitter

The remote control can activate during shipping and drain the battery that is installed in the control. We

send a replacement battery with the system if this occurs.

2. Check the voltage supply at the receiver

The receiver is designed to function at 110VAC. Voltage on the (+) and (-) terminals on the control should

be within this range.

3. Reprogram the remote control

If the system is non-functional try to reprogram the remote control. The program may not have taken

during the programming process or the program button may have been pressed. If the program button is

pressed the memory of the remote controls programed to the receiver are erased.

4. Listen and look for functionality on the receiver.

The LED that is used for programming the system will illuminate when the receiver is activated. You will

also hear a "click" when the internal relays engage. If you can see the LED illuminate and you hear the

relay "click" the issue is most likely in the wiring or device being controlled.

Troubleshooting

Programming Switch

Programming LED

RF340-DRC

Long Range

GAMA Electronics, Inc.

www.gamainc.com

Antenna Jack

UP-Violet, Green

DOWN-Black, Brown

STOP-Red, Orange

RF340-DRC

Instruction Manual

Auxiliary Switch

Leads

Page 3 REV A 06/06/18