Hikmicro E1L Manual do utilizador - Página 11
Procurar online ou descarregar pdf Manual do utilizador para Câmara digital Hikmicro E1L. Hikmicro E1L 13 páginas. Handheld thermography camera
Imprimir página
3
4
5
6
4.2 Other Configurations
Here is an example of setting laser light
function.
Steps:
1
2
3
4
5
Note: Other parameters, such as temperature
measurement range, unit, palettes and so on,
can be configured as steps above.
5 System Information
Go to Menu > About to view the device
information: Model, Version No., FPGA Version
No., Serial No., Capacity and so on.
You can also set the auto power-off duration,
date and time in Menu.
Press
interface.
Emissivity: Set the emissivity of your
target as the effectiveness in emitting
energy as thermal radiation.
Note:
Refer to the 6.1 Common
Material Emissivity Reference for
emissivity values.
Temperature: Set the average
temperature of the environment.
Distance (m/feet): Set the straight-line
distance between the target and the
device.
Note: The recommended
thermometry distance is 0.2 m to 2
m with target size 80 × 80 mm.
Rule: Select Hot Spot, Cold Spot to
show the max. temperature, min.
temperature in the live view interface.
Press
desired parameter, and press
button to enable it.
If necessary, press
to increases / decrease the setting
values. Hold
change the value quickly.
Press
In the live view interface, press
button show the menu bar.
Press
Laser.
Press
laser light function.
Press
In live view interface, pull the trigger to
turn on laser light, release the trigger to
turn off laser light.
button to go to the setting
/
button to select
/
button to save and exit.
/
button to select
button to turn on / turn off
button to save and exit.
/
button
button to