Corbin Russwin CL3570 Instruções de instalação - Página 2

Procurar online ou descarregar pdf Instruções de instalação para Fechaduras Corbin Russwin CL3570. Corbin Russwin CL3570 4 páginas. Grade 1 key-in-lever cylindrical lockset cl3500 series

Imprimir página
Door & Frame Preparation
Mark door
Locate and mark horizontal center line at desired height above
floor. Fold template over edge of door, centering on horizontal
line. Mark centers of holes at proper backset.
of the door.
Note:
Be sure to verify backset before marking & drilling door.
Drill door
A.
2-1/8" (54mm) hole thru door. Cut ANSI tab notch es
as shown on template (except CL3550 and CL3570).
B.
Drill 1" (25mm) hole in edge of door. Cut out for
latch front 5/32" (4mm) deep. 1-1/8" (29mm) wide
x 2-1/4" (57mm) high. Check latch unit for proper
width front and square or round corners
(except CL3550 and CL3570).
C.
Drill two (2) 11/32" (8mm) Dia. holes through door
for all functions.
Caution:
To avoid splintering wood doors, drill holes from both sides.
Copyright © 2012 Corbin Russwin Inc., an ASSA ABLOY Group company.
2 of 4
All rights reserved. Reproduction in whole or in part without the express written
permission of Corbin Russwin, Inc. is prohibited.
Install Strike
Mark both sides
Optional Installations
For CL3580 & CL3581 Function Only.
®
ASSA ABLOY
FM237 (07/12)