Dea SWINGER Manual de Instruções - Página 9

Procurar online ou descarregar pdf Manual de Instruções para Abertura de portões Dea SWINGER. Dea SWINGER 20 páginas. Electro-mechanical operator for swing gates
Também para Dea SWINGER: Instruções de funcionamento e avisos (13 páginas)

Imprimir página

1. Installation and Assembly

7.2 Learning

1. Scroll down the parameters with

keys until you visualise P005;

2. Confirm by pressing on the

3. When the symbol "

" appears, press on

any key of the transmitter you want to memo-

rize;

4. The display visualizes the number of the trans-

mitter just memorized and then "

5. Memorize all necessary transmitters repeat-

ing this procedure from step 3;

6. Wait 10 seconds before quitting the memori-

zation mode, display shows now "- - - -".

Warning: In the case of rolling code remotes,

the receiver can be put into learning mode by

pressing the hidden button on a remote control

previously learned.

Warning: When using personalized transmitters,

after entering P005 the learning of the first

personalized transmitter is possible only by

pressing its hidden button. Afterwards, only

transmitters

personalized

encryption key can be memorized (through the

usual procedure), unless a memory reset is

carried out (P004).

8 Adjustment of operating parameters

If you need to modify the operating parameters (force, speedness

etc..):

1. Scroll down the parameters until you visualize the desire para-

meter (i.g. P032);

2. Access the parameter by pressing the

3. By pressing on

and

4. Confirm by pressing on the

previously selected).

For the complete list of the "Operating Parameters" See the

table on page. 29.

9 Programming complete

WARNING At the end of the programming procedure, use the buttons

is now ready again for new manoeuvres.

To perform any "Advanced Programming" operations (cancellation of the remotes, configuration inputs, etc. ..), see on page 24.

and

key;

with

the

same

key;

keys, set up the desired value;

key (display shows the parameters

and

until the appearance of the symbol "- - - -", the operator