Gama Sonic 20B50033 Manual de instruções - Página 3

Procurar online ou descarregar pdf Manual de instruções para Equipamento de iluminação Gama Sonic 20B50033. Gama Sonic 20B50033 4 páginas. Silo bulb solar light

Imprimir página
3. Assembly Instructions
NOTE: The following steps are for reference only. Consult your
local hardware store for the best installation method for your
surface.
1. Remove the top (A) from the fixture by removing the two
screws from the underside of the top.
2. Install the GS Solar LED Bulb into the top (A) by twisting it
clockwise. Be sure to hold the bulb by its base.
3. Turn the lamp on using the operation switch located on the
underside of the top (A)
4. Attach the top (A) to the fixture (B) and secure with the two
screws.
3" Fitter Mount
NOTE: If you are replacing an existing gas/electric post light,
you must consult a certified technician to disconnect them
before installation.
• Begin by attaching the Fitter (C) to the fixture (B). Secure the
fitter (C) by twisting it clockwise.
• Place part (C) on your existing 3" pole and secure with the
provided set screws.
• Be sure to not overtighten the screws.
Pier (Flat) Mount
• Using the pier mount (D) as a template, drill two holes in the
desired mounting location.
• Place the anchors in the holes and secure the mount (D) to
the surface using the provided screws.
• Attach the fixture (B) to the mount (D) by twisting the fixture
clockwise.
Wall Mount
Note: Installing the light on a wall may limit the solar panel
for sun exposure. Make sure the lamp is mounted so direct sun
exposure is available.
• Using the wall mount (E) as a template, drill two holes in the
desired mounting location.
• Place the anchors in the holes and secure the mount (E) to
the wall using the provided screws.
• Attach the fixture (B) to the mount (E) by twisting the fixture
clockwise.
page 3
B
B
B
C
Screws
4. Operation Instructions
1. Install the GS Solar LED Bulb in the top (A).
2. Locate the operation switch on the underside of the top (A).
3. Turn the operation switch to the Low or High position
according to your preferences:
- Low = Softer light and longer duration
- High = Brighter light output
The solar Lamp will automatically operate at dusk.
A. 3" Fitter
B
B. Pier Mount
B
C
Screws
C. Wall Mount
B
E
D
Anchors
B
C
Screws
Anchors
B
E
D
Anchors
Screws
Anchors
D
Sc