HIKOKI SB3608DA Manual de Instruções de Manuseamento - Página 14

Procurar online ou descarregar pdf Manual de Instruções de Manuseamento para Ferramenta eléctrica HIKOKI SB3608DA. HIKOKI SB3608DA 20 páginas.

Imprimir página

*7 How to hold and move the belt sander

○ Remove the tool from the workpiece and turn on the

trigger switch. When ﬁ nishing, turn oﬀ the trigger switch

after the tool is removed from the workpiece, and set the

tool down after the rotation has stopped.

○ Grasp handle and handle knob and hold machine

against surface to be worked on so that it contacts

surface lightly.

○ Hold both handles ﬁ rmly, and take great care to keep

your ﬁ ngers away from the pulleys and sanding belt

while working.

○ Weight of machine itself is suﬃ cient for sanding and

polishing at highest eﬃ ciency.

○ Do not apply any additional pressure, for this would

place unnecessary load on motor, shorten life of sanding

belt and lower work eﬃ ciency.

○ Choose sanding belt of proper grain size and grain type

for your speciﬁ c purpose, by referring to Table 4 and 5

below.

Derived ﬁ nish

Coarse ﬁ nish

Medium ﬁ nish

Semi ﬁ ne ﬁ nish

Fine ﬁ nish

Grain type

Steel, Wood

Wood, Bamboo

MAINTENANCE AND INSPECTION

WARNING

Be sure to turned oﬀ the switch and remove the battery

before maintenance and inspection.

1. Empting and cleaning the Dust Bag

Clean the dust bag after working to remove any sanding

dust. (Fig. 5)

NOTE

If too much dust accumulates in the dust bag, the dust

collection power will be reduced.

Dispose of dust as soon as possible.

2. Inspecting the sanding beIt

The abrasive performance of the sanding belt will

decrease if its abrasive particles become worn away or

clogged, greatly reducing the eﬃ ciency of the tool. If this

occurs, replace with a new sanding belt.

3. Cleaning on the outside

When the power tool is stained, wipe with a soft dry cloth

or a cloth moistened with soapy water. Do not use chloric

solvents, gasoline or paint thinner, for they melt plastics.

Table 4

Proper grain size

30–40

40–100

80–240

180–400

Table 5

Surface to be worked on

4. Cleaning the battery installation compartment and

the battery

WARNING

Wear protective glasses and a dust mask when cleaning

with an air blow gun.

Failure to do so may result in inhalation or exposure of

the eyes to debris or dust.

After working, if sanding dust has accumulated on the

battery installation compartment and the battery, clean

oﬀ the accumulated sanding dust with an air blow gun or

a dry cloth before using the tool. (Fig. 13)

NOTE

○ After cleaning, ensure that the battery can be installed

and removed smoothly from the tool.

○ Using the tool when the battery is covered with sanding

dust may lead to accidents such as the battery falling

during use.

Furthermore, such use may cause a malfunction or

contact failure between the battery and terminals.

5. Maintenance of the motor

The motor unit winding is the very "heart" of the power

tool. Exercise due care to ensure the winding does not

become damaged and/or wet with oil or water.

6. Storage

Store the power tool and battery in a place in which

the temperature is less than 40°C and out of reach of

children.

NOTE

○ When storing the tool in the case, keep sanding dust and

debris away from it.

Remove the battery from the tool and attach the battery

cover. (Fig. 14)

○ Storing lithium-ion batteries.

Make sure the lithium-ion batteries have been fully

charged before storing them.

Prolonged storage (3 months or more) of batteries with

a low charge may result in performance deterioration,

signiﬁ cantly reducing battery usage time or rendering

the batteries incapable of holding a charge.

However, signiﬁ cantly reduced battery usage time may

be recovered by repeatedly charging and using the

batteries two to ﬁ ve times.

If the battery usage time is extremely short despite

repeated charging and use, consider the batteries dead

and purchase new batteries.

CAUTION

In the operation and maintenance of power tools, the

safety regulations and standards prescribed in each

country must be observed.

Important notice on the batteries for the HiKOKI

cordless power tools

Please always use one of our designated genuine

batteries. We cannot guarantee the safety and

performance of our cordless power tool when used with

batteries other than these designated by us, or when

the battery is disassembled and modiﬁ ed (such as

disassembly and replacement of cells or other internal

parts).

NOTE

Due to HiKOKI's continuing program of research and

development, the speciﬁ cations herein are subject to

change without prior notice.