aireRyder F0003 Manual - Página 4

Procurar online ou descarregar pdf Manual para Ventilador aireRyder F0003. aireRyder F0003 9 páginas.

Safety Instructions

READ ALL SAFETY INFORMATION AND INSTALLATION INSTRUCTIONS BEFORE YOU BEGIN

INSTALLING THE FAN AND SAVE INSTRUCTIONS.

All set screws of the fan must be checked and retightened where necessary before installation.

To reduce the risk of personal injury, do not bend the blade brackets when installing the brackets,

balancing the blades or cleaning fan. Do not insert foreign objects in between rotating fan blades.

Before changing the fan direction, turn off the fan and wait for the fan blades to stop completely.

If a stationary appliance is not provided with a supply cord and a plug, or with other means for

disconnection from the mains supply having a contact separation of at least 3 mm in all poles, that

means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.

NOTE: The safeguards provided by these safety instructions and by the separate installation

instructions are not meant to cover all possible conditions and situations that may occur. It must be

understood that common sense, caution and care are factors which can not be built into this product.

These factors must be supplied by the person(s) installing, caring for and operating the fan.

WARNING

TO AVOID RISK OF ELECTRIC SHOCK, BE SURE TO SHUT OFF POWER AT THE MAIN

FUSE OR CIRCUIT BREAKER BOX BEFORE INSTALLING OR SERVICING THIS

FIXTURE. TURNING OFF THE ELECTRICAL POWER BY USING THE LIGHT SWITCH

IS NOT SUFFICIENT TO PREVENT ELECTRICAL SHOCK.

TO REDUCE THE RISK OF INJURY, INSTALL THE FAN SO THAT THE BLADES ARE

AT LEAST 7 FEET (2.1 METERS) ABOVE THE FLOOR AND AT LEAST 18 INCHES

(0.5 METERS) FROM THE TIP OF THE BLADES TO THE WALL.

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR PERSONAL INJURY, MOUNT

TO OUTLET BOX MARKED "ACCEPTABLE FOR FAN SUPPORT" AND USE MOUNTING

SCREWS PROVIDED WITH THE OUTLET BOX.

THE INSTALLATION HAS TO BE IN ACCORDANCE WITH THE NATIONAL ELECTRICAL

CODE, ANSI/NFPA 70-1999 AND LOCAL CODES. IF YOU ARE UNFAMILIAR WITH THE

METHODS OF INSTALLING ELECTRICAL WIRING, SEEK THE SERVICES OF A

QUALIFIED LICENSED ELECTRICIAN.

PAGE: 4 / 9

180725