MAINSPRING OXFORD GUARDIAN Manual de instruções - Página 7

Procurar online ou descarregar pdf Manual de instruções para Ver MAINSPRING OXFORD GUARDIAN. MAINSPRING OXFORD GUARDIAN 8 páginas.

TROUBLE SHOOTING

Please note that the winder is designed to rotate and maintain the amount of

power reserve in the watch. If your watch is already on a low amount of

power reserve or is not running when you place it in the winder, it may not

work.

Please check that the door of the winder is closed. The winder motors will

stop running when the door is open when the "SELF STOP SWITCH" is

operated.

There are some factors which generally affect the effectiveness of the

winder :

1. Check the watch placement in the winder. Your watch should be placed

in the winder with the dial facing you. When looking at your watch in

the winder, it should be as if you are making a reading of it from your

wrist.

2. Some watches must be fully wound before being placed into the winder

as the power reserve when removed from your wrist may not be enough

to keep the watch wound. Please refer to your instruction manual on how

to manually wind your watch.

3. Manually wind your watch prior to placing it into the winder.

You can prop the back of the winder using a book or magazine to

increase the angel of the turntable and test the winder again. The closer

the watch dial is to being vertical the better the chance of the test being

accurate.

CAUTION:

1. Please use the adapter included with your watch winder or similar

adapters with the exact same voltage output.

2. Please do not manually spin the winder. This will damage your watch

winder and void your warranty.

3. Avoid exposing the watch winder to direct sun, water and extreme

temperatures which may damage the watch winder.