aireRyder Zephyr Instruções de instalação e utilização - Página 3
Procurar online ou descarregar pdf Instruções de instalação e utilização para Ventilador aireRyder Zephyr. aireRyder Zephyr 4 páginas.
Imprimir página1. Switch off the electricity
using the switch at the
circuit breaker box.
4. Connect the internal lead wire
from the bracket to the fan by
joining the two plastic 3-way
connectors. Make sure that the
connectors are firmly snapped
together.
7. Unscrew the screws and spring washers from the fan motor. Install
the fan blade sets onto the motor by tightening the screws and spring
washers evenly.
Mounting
Bracket
Flat Washer
Spring Washer
Mounting
Screw
2. Pass the supply wires through
the mounting bracket. Secure the
mounting bracket to a ceiling joist
or other structural ceiling element
with two screws, spring washers
and flat washers. Ensure that the
support for the mounting bracket
is capable of safely holding the
moving weight of the fan.
5. Connect wires from supply and
bracket to the wiring terminals as
follows:
Brown wire
Blue wire
Green/yellow striped wire
Screw
Spring Washer
Fan Blade
Mounting
Bracket
Fan
Assembly
3. Lift the fan assembly onto the
mounting bracket.
Make sure
the guide pin of the bracket is
fitted into the corresponding
slot of the ball joint.
6. Lift the canopy to the ceiling
and rotate it counterclockwise
until the screws drop into the
slot recesses. Insert the other
two set screws and washers.
Tighten all the screws, make
sure that the canopy is secure
and that you have not trapped
any wires.
8. Attach the pull cord; ensure
that the pull cord retaining clip
supports the cord.
3