Cordex TOUGHPIX DIGITHERM Manual do utilizador - Página 5
Procurar online ou descarregar pdf Manual do utilizador para Câmara digital Cordex TOUGHPIX DIGITHERM. Cordex TOUGHPIX DIGITHERM 11 páginas. Digital imaging camera
Também para Cordex TOUGHPIX DIGITHERM: Manual do utilizador (9 páginas), Manual do utilizador (9 páginas)
Imprimir páginaGETTING STARTED
Battery Pack
Please ensure the battery pack is
fully charged where possible for
optimum results and maximum
runtime. The battery pack is removed
and inserted via the access door on
the base of the camera. The battery
pack is charged using the docking
station supplied. Refer to the section
on battery pack operation for details.
Turning the Power ON/OFF
Use the power button on the top of
the camera to turn the camera on
and off. The on button is identified
on the top of the camera with the
ON/OFF symbol located next to
the shoot button.
Please refer to Time and Date section
if setup is required before operation.
Camera Interface Menus
All camera settings and features are
navigated and selected using the
joystick:
Short press enters the
camera menu
Long press enters the
analysis menu
RUGGED
AUTHORITY
CAMERA MENU
This menu has the following icons:
Visible Imaging
IR Imaging
Image Review
WIFI
Time and Date
Firmware
ANALYSIS MENU
This menu has the following icons:
SPOT & BOX Configuration
GLOBAL IR parameter
TAKING PICTURES
Visible Imaging
Controls the VISIBLE imaging and capture modes.
•
LED: flash operation options.
DISABLED: LED flash turned OFF.
ENABLED: LED flash turned ON.
AUTO: LED flash enabled dependent on ambient light.
•
FLASH CHARGE STATUS: the top right of the display shows:
GREEN indicates fully charged.
RED indicates charging in progress.
•
TIME LAPSE: Sets time period for delay from shoot-button activation.
TIME LAPSE PERIOD: single, 30 sec, 1 min, 2 min, 5 min.
ACTIVATION: Started and stopped by the shoot-button.
INDICATOR (top left): Shows current setting (in seconds).
When running shows the time to next image.
•
TL THRESHOLD: Sets the temperature threshold for the time lapse to start.
TEMPERATURE: Sets the threshold temperature (-10˚C disables).
ACTIVATION: Started and stopped by the shoot-button.
•
BRIGHTNESS: Adjusts the visible image brightness.
BRIGHTNESS: -4, -3, -2, -1, 0 (default), 1, 2, 3, 4. Normal operation 0.
•
CONTRAST: Adjusts the visible image contrast.
CONTRAST: -4, -3, -2, -1, 0 (default), 1, 2, 3, 4. Normal operation 0.
•
SATURATION: Adjusts the visible image saturation.
SATURATION: -4, -3, -2, -1, 0 (default), 1, 2, 3, 4. Normal operation 0.
To focus an image, point the camera at the target of interest and the camera will
automatically focus. Once the camera is focused and the image is clear, press the
shoot button whilst the camera takes the shot.
TOUGHPIX DIGITHERM – User Manual
Document Reference CDX8950-532 Rev. B
9