Jadever 30K Manual do utilizador - Página 13

Procurar online ou descarregar pdf Manual do utilizador para Balanças Jadever 30K. Jadever 30K 14 páginas.

=Enable

7) P06 Set the activation mode of backlight. Options are ONOFF (Auto on with items greater

than 9d placed on the weighing pan or any key is pressed), ON (Backlight on) and OFF (No

backlight)

8) P07 Set Print mode.

= manual print

9) P08 Set the filtering level in which the stable indication turns on .The higher the setting, the

slower stabilization time. Options are Fil 1,Fil 2,Fil 3 and Fil 4.

10) P09 Set the range in which the Zero indication turns on . Options are Zero.0(1 division) ,

Zero.1(2divisions),

Zero.5(6divisions ) .

11) P10 Initial Setup (not available )

12) P11 Unit setting( refer to section 5-6).

8. Serial Interface

If external interface is needed, please select the proper three-in-one board first, which

integrates RTC (time display), RS-232 and relay (weight checking) functional module onto

one circuit board. Only after this board is adopted, the three functions can be realized.

1) RS232+RTC+Relay+ (SH-24，BP545D , Godex and ZEBRA) printer

2) RS232+RTC+Relay+ LED Light Tower (Applicable to the quality control of the factory

product quantity or weight and that of the total production line.)

3) RS232+RTC+Relay+Computer

=Disable

= Stable print

Zero.2(3divisions),

Zero.3(4

Vetek Weighing AB

= Continuous print

divisons

Zero.4(5divisions)

and