Jadever JWL-1.5K Manual - Página 15

Procurar online ou descarregar pdf Manual para Acessórios Jadever JWL-1.5K. Jadever JWL-1.5K 20 páginas.
Também para Jadever JWL-1.5K: Manual (20 páginas)

Imprimir página

If external interface is needed, please select the proper three-in-one board first, which integrates

RTC (time display), RS-232 and relay (weight checking) functional module onto one circuit board.

Only after this board is adopted, the three functions can be realized.

8-1 RS-232 Diagram

Single Option

1) RS232+RTC+Relay+ (SH-24，BP545D , Godex and ZEBRA) printer

2) RS232+RTC+Relay+ LED Light Tower (Applicable to the quality control of the factory product

quantity or weight and that of the total production line.)

3) RS232+RTC+Relay+Computer

9. Troubleshooting and Error Message

Error Message

ERR0

ERR2

ERR3

ERR4

ERR5

Problem

Exceed the zero range

Exceed the initial zero point

Exceed

the

A/D

range

EEPROM failure

Overload condition

(II)

shootings

The item should be within 2% of full load

1. Check whether there are other alien

articles on the scale pan, remove those

articles.

2. LOAD CELL failure, which requires to be

changed or to contact our Service.

1. Check whether it is A/D failure, if yes,

please replace AD.

resolution

2. LOAD CELL failure, replacement

required or contact our Service.

Re-sold EEPROM or contact our Service.

Remove weight that is greater than the scale

capacity from the pan.

JWL