Airespace AS 1500 Manual de instalação rápida - Página 11

Procurar online ou descarregar pdf Manual de instalação rápida para Ponto de acesso sem fios Airespace AS 1500. Airespace AS 1500 15 páginas. Intelligent rf ap

Imprimir página

Figure -

Assembling the Airespace AP to the Slotted Clips

•

Attach the cables to the sides of the Airespace AP.

Make sure the cables are routed away from the Airespace AP antennas.

Note:

When the Airespace AP is powered up and is associated with an Airespace

Note:

Switch or Appliance (Green/Power and Yellow/802.11b/g and/or Yellow or Amber/

802.11a LEDs lit), the Airespace AP begins broadcasting its beacon signal(s). When

this happens, complete the installation as quickly as possible to remove yourself

from within 8 inches (20 cm) of the Airespace AP to comply with FCC RF radiation

exposure guidelines.

You have installed the Airespace AP. Repeat

location, and then continue with

Step 5: Returning MAC Information

When you have completed the installations as outlined in

the MAC addresses and their locations on the maps or floor plans to the network planner or manager.

The Airespace Control System Software (ACS Software) operators will use the MAC address and

location information to create maps for precise wireless Airespace Operating System management.

Also return any unused mounting clips and external power supplies to the network planner or manager

for use in future deployments.

Please remind the Network Planner or Manager that now is a good time to

Note:

12/29/04

90-100tbd-000 Rev 1 (Preliminary 3)

TBD

Step 4: Mounting the Airespace APs

Step 5: Returning MAC

Step 5: Returning MAC Information

Information.

Step 4: Mounting the Airespace

for each Airespace AP

APs, return