Deagostini MODEL SPACE SUZUKI GSX 1300R HAYABUSA Manual de montagem - Página 4
Procurar online ou descarregar pdf Manual de montagem para Brinquedo Deagostini MODEL SPACE SUZUKI GSX 1300R HAYABUSA. Deagostini MODEL SPACE SUZUKI GSX 1300R HAYABUSA 11 páginas. Pack 03
Também para Deagostini MODEL SPACE SUZUKI GSX 1300R HAYABUSA: Manual de montagem (13 páginas)
Imprimir página
2
Push the brake disc fully onto the wheel by
pressing firmly on its centre, as indicated
by the arrows. Then fit the brake disc
received with this stage onto the other
side of the wheel. If the discs fit loosely on
the wheel, you can apply a small amount
of adhesive to secure them.
6
Insert the end of the front axle into the
hole in the end of one of the forks.
3
Unscrew the axle nut from the front axle.
7
Push the front axle all the way through
the assembly. If it does not pass all the
way through, check that the holes are still
aligned. Re-align them if necessary.
SUZUKI GSX 1300R Hayabusa: Assembly Guide
4
Note the position of
the caliper
Match the direction of the tread
on the tyre to that shown here
Hold the wheel and forks in the
orientations shown above. Place the wheel
between the front forks (Stage 7).
8
Turn the assembly over so that you can
see the end of the axle. Place the axle nut
remove in Step 3 over the end of the axle.
5
Align the holes at the ends of the forks
with the hole through the centre of
the wheel.
9
Screw the axle nut onto the end of the axle
by hand.
25