Maisi Smart Dashcam Manual de início rápido - Página 4
Procurar online ou descarregar pdf Manual de início rápido para Câmaras de tração Maisi Smart Dashcam. Maisi Smart Dashcam 16 páginas.
Imprimir página
NO.
1
USB: Power/Mass Storage
2
AV Output: 3.5mm connector
3
GPS: NOT included
4
: Menu / emergency
5
recording Button
6
Wide Angle Lens
7
Note:
* Power Button: Press it once to turn on the camera, hold the press (2-3s) to
turn off the camera, if the camera is in recording mode, press
the LED, press it again to turn it off.
* To go to Menu, make sure the camera is not recording. If the camera is
recording, press REC to stop the recording then press
* Same rules apply (stop recording first) if you want to change the camera
from recording mode to Picture Mode or Playback Mode.
2 Getting Started
2.1 Inserting the Memory Card
Insert the memory card with the gold contacts facing the back of the
camcorder. Push the memory card until it clicks into place.
To remove the memory card: Push to eject the memory card out of the slot.
Note:
1. Do not remove or insert the memory card when the camcorder is turned on.
This may damage the memory card.
2. It is recommended to use a 32GB, Class 10 or above micro SD card.
3. Please format the micro SD card prior to the initial use.
4. If the screen shows "Low Speed Card" while recording, it means the writing
ITEM
Power Button
Speaker
NO.
8
9
10
11
12
Recording/Picture/Playback
13
14
Page 3
ITEM
TF Card Slot
Up Button (
Down Button (
: Record / Pause / OK
MODE:
HDMI Output
Reset
to turn on
to go to Menu.
)
)