Jaen Siracusa 16E+ Manual - Página 12

Procurar online ou descarregar pdf Manual para Instrumento musical Jaen Siracusa 16E+. Jaen Siracusa 16E+ 20 páginas.

If the gauge doesn't fit, turn the adjustment nut with the large Hex



key, counter-clockwise as seen from the peghead end, an eighth of

a turn or less (see drawing).

Wait until the following day, then adjust the



height of the bridge (Page 6) and repeat the

process.

Put in place the magnetic truss rod access



cover again.

Method B.- This is the way to adjust your guitar if

your style involves all the fretboard.

Press a string (preferably, the third or fourth) simultaneously on



frets 1 and 15. Press it lightly on the seventh fret and check if there

is a gap between the fret and the string. If there is one, but it is

extremely small, close to nothing, then stop here: you won't need

any adjustments.

Remove the magnetic truss rod access cover: insert the small Hex



key into its hole until you find some resistance, then pull.

If there is a noticeable gap between the fret and the string at fret



#7, then turn the adjustment nut with the large Hex key, clockwise

as seen from the peghead end, an eighth of a turn or less (see

drawing).

If the string is making contact with the seventh fret, turn the



adjustment nut with the large Hex key, counter-clockwise as seen

from the peghead end, an eighth of a turn or less (see drawing).

Wait until the following day, then adjust the height of the bridge



(Page 6) and repeat the process.

Put in place the magnetic truss rod access cover again.



CCW