Dean Mean16 Manual do Proprietário - Página 2
Procurar online ou descarregar pdf Manual do Proprietário para Amplificador de instrumentos musicais Dean Mean16. Dean Mean16 2 páginas.
Imprimir página3
1
2
HI - INPUT
1
Connect your guitar either to the
HI or LO input. Use the HI input for
passive guitars to achieve best gain.
LO - INPUT
2
The LO input is best for active
guitars (built-in preamp).
VOLUME (Clean)
3
Select the desired volume for your
CLEAN sound. This only effects
your volume when the select
switch is left in the out position.
SELECT (Switch)
4
Switch
between
OVERDRIVE sound. When the
SELECT switch is pressed, the
overdrive channel is engaged.
DRIVE CONTROL
5
Controls the level of distortion and
g i ves you sounds from a slight
overdrive to a powerful distortion.
SHIFT
6
The Shift control is a special
designed electronic circuit to select
different colors of overdrive.
VOLUME (Overdrive)
7
This control sets the volume level
for the overdrive channel. This only
effects your volume when the
select switch is pushed in.
Tone controls Bass, Mid and Treble work for both channels!
4
6
5
CLEAN
and
MASTER EQ
1 0
9
8
7
Co ntrol Knob Fu n ct i o n s
BASS
8
This control allows a total range of
30dB of boost or cut at a frequency
of 120Hz. Due to the high amount
of low fre q u e n c i e s, you may
decrease it at high volumes.
MID
9
Set this control to your desire d
amount of MID frequencies. In center
position it is "flat" (No boost or cut).
TREBLE
1 0
Adjust the high frequencies with
this control to customize yo u r
sound.
POWER LED
1 1
This LED indicator lights up when the
Mean 16 amplifier is switched ON.
PHONES
1 2
Insert the plug of your headphones
to this jack. The built-in speaker
will be switched off.
EXT. SPEAKER (on backside)
1 3
For
external
Switches the internal speaker off!
POWER (on backside)
1 4
This switch is used to turn the
Mean 16 amplifier ON.
1 1
1 2
speakers
(4
8 ) .
˜