Gree NEO24HP230V1A Manual do Proprietário - Página 5

Procurar online ou descarregar pdf Manual do Proprietário para Bomba de calor Gree NEO24HP230V1A. Gree NEO24HP230V1A 12 páginas. High-wall ductless air conditioning & heating system
Também para Gree NEO24HP230V1A: Manual de início rápido (2 páginas)

Imprimir página

Gree NEO24HP230V1A Manual do Proprietário

TWD-0813-033 Neo Manual REV:Layout 1 9/27/13 11:14 AM Page 9

OPERATION OF WIRELESS REMOTE CONTROLLER

REMOTE CONTROLLER FUNCTIONS

CLOCK Button

• Press the CLOCK

button to enter Clock Setup Mode. The clock icon will begin

flashing. Set the clock by pressing the + or - buttons. Press once for slow adjustment;

press and hold down for fast adjustment.When finished, press the CLOCK button to

save your clock settings. Note that this is the current time,

not the timer setting.

NOTE: The clock panel on the remote controller will display the time regardless of

whether the unit is ON or OFF.

LIGHT Button

• Press the LIGHT button to turn On or Off the display on the indoor unit front

panel. When the indoor unit first powers on, the front panel display will default

to ON. The LIGHT

icon will display when the front panel display is ON.

TURBO Button

• Press the TURBO button to reach the desired room temperature faster. After

selecting the"HEAT"or"COOL" mode button, push the"TURBO" button.

This will force the unit to run at ultra high speed. When TURBO mode is running,

the TURBO

icon is displayed on the remote controller.

X-FAN Button

• Press the X-FAN button to allow the indoor fan to run for 10 minutes after the

unit is turned off (cooling or dry modes only) to ensure that additional moisture

is removed from coil. X-FAN

+ Button

• Press the + button to raise the room setpoint. Press once for slow adjustment

and hold down for fast adjustment.

– Button

• Press the – button to lower the room setpoint. Press once for slow adjustment