Maiwe MIEN2026 Manual do utilizador - Página 9
Procurar online ou descarregar pdf Manual do utilizador para Interruptor Maiwe MIEN2026. Maiwe MIEN2026 18 páginas. Rack mount industrial ethernet switch
MIEN2016/2018/2024/2026 Rack Mount Industrial Ethernet Switch
servers, hubs or other switches using straight-through network
cables/crossover network cables. Each port supports IEEE802.3x adaptive, so
the most suitable transmission mode (half-duplex or full-duplex) and data rate
(10Mbps or 100Mbps) can be automatically selected (the connected device
must also support this feature). If the devices connected to these ports do not
support auto-negotiation, the ports will send at the correct speed, but the
transmission mode will default to half-duplex.
The power input terminals are shown in Figure 2-4.
Figure 2-4 Schematic diagram of power input terminal
The power requirements of this series of switches are shown in Table 2-2.
Voltage
220VAC/DC
2.2. Hardware installation
2.2.1. Installation requirements
The industrial Ethernet switch is a single structure, which can be directly
installed on a 19-inch rack. Before installation, first confirm that there is a
suitable working environment, including power requirements, sufficient space,
whether it is close to other network equipment to be connected, and whether
other equipment is in place. Please confirm the following installation
requirements:
Power requirements: standard products use AC220V power supply. For
Table 2-2 Switch power requirements
voltage
Operating
range
temperature
85~265
VAC
47-63Hz
-40°C~85°C
or
110~370
VDC
- 5 -
Storage
Humidity
temperature
-40°C~85°C
5~95%